Falken Falken Tires
Falken Tires

Falken 28-922-672 Ziex ZE-912 225/50R16XL 96V BSW

  • UTQG: 360AAA
  • Mileage Warranty: 40000
In Stock
tire savings Buy More Save Moretire savings
1 Tire
2 Tires
tire savings Buy More Save Moretire savings
Tire Cost
Instant Rebate
Total Cost/tire
Est. Del. Days
As low as
$ 335.04
-$ 10.04
Rims Not Included
This listing is for new Falken Ziex ZE-912 225/50R16XL 96V BSW Tires. Manufacturer part number: 28-922-672.

The Falken ZIEX ZE-912 tire is designed with performance and technology that boosts the driver's confidence in all types of weather conditions. It has full depth sipes in the tread blocks, as well as high void circumferential grooves. These features provide resistance in hydroplaning and grip on ice and snow for better all-season grip. The Ziex ZE-912 also has excellent dry performance due to its hybrid-asymmetric pattern. It has a joint-less Nylon Cap Ply for long lasting and even wear and durability.  High Tension Carcass  bests help to increase handling response and to provide stability even at a high speed, High Angle Variable Cross Grooves are added for efficiently dispersing water from the contact area and Steel Belts with stronger steel cord for exceptional performance.

The Ziex ZE-912 also features Tread wear Indicators and Infinite Sipe Sequence to enhance over all grip while increasing traction specifically in winter months. The tire is available in a large range of H, V and W speed ratings, so there is very likely a Ziex ZE-912 that fits your vehicle.

Specs: Value: Description:
Sidewall BSW
This describes the sidewall appearance. Examples include Black Sidewall, White Sidewall, and White Letters.
Load Index 96
The load index (LI) is a 2 or 3 digit number that corrolates to the maximum amount of weight the tire can carry. For example, a tire with a load index of 87 indicates that the tire can carry a maximim load of 1,201 lbs. In the case of our example the 87 identifies the tires ability to carry a maximum of 1,201 lbs. So 4 tires will carry a maximum of 4,804 lbs. Refer to your vehicle owner's manual for the recommended minimim Load Index. It is not recommended to install tires with a lower Load Index. By doing so, this could cause your tires to be overloaded thus potentially causing a blowout.
Speed Rating V
Speed Ratings (SR) are based on laboratory tests and indicates the maximum speed the tire can achieve. These tests are based on limited time trials. Higher speed rating tires typically will yield better handling capabilities, but may often result in lower mileage. Refer to your vehicle owner's manual for the recommended minimum Speed Rating. It is not recommended to install a tire with a lower speed rating as it could affect the handling of your vehicle. It is important to note that speed ratings only apply to tires that have not been damaged, altered, under-inflated or overloaded. Additionally, most tire manufacturers maintain that a tire that has been cut or punctured no longer retains the tire manufacturer's original speed rating, even after being repaired because the tire manufacturer can't control the quality of the repair.
Ply Rating Not Available
Ply Rating is related to the max load capacity. This value can be defined with a letter or number. The higher the number/letter, the higher the load capacity.
To help consumers evaluate their tires, the U.S. National Highway Traffic Safety Administration (NHTSA) created the Uniform Tire Quality Grading System (UTQG). The UTQG rates tires are rated on their tread-wear, traction performance, and temperature resistance. The grade for each of these can be found on the sidewall of your tire (except for winter tires and certain light truck tires). Click here for more information.
Max Single Load(lbs) 1565 The maximum load this tire will support. Remember to multiply this number by the number of tires installed on your vehicle to get the maximum carrying capacity. This number is directly related to the Load Index.
Max Single Air Pressure(PSI) 50 The maximum air pressure this tire will support. This does not represent the amount of air pressure your tires should have at all times. Consult with your owner's manual to determine the best air pressure you should use for your vehicle.
Tread Depth 10.0 The amount of tread on the tire. Once the tire is worn to 2/32nds, it is considered fully used and should be replaced at that time. Most tires will have tire indicators in the grooves of the tire to help you determine when the tires are worn down to 2/32nds.
Tread Design Asymmetrical
Nondirectional - most common, same tread pattern on inside & outside of the tire. Can be rotated to all four corners of vehicle.
Asymmetrical - tread pattern is different on the inside to the outside of the tire, and must be mounted properly. Can be rotated to all four corners of the vehicle.
Directional tires - roll in only one direction, must be mounted properly. Once mounted they must remain on the same side of the vehicle, and only be rotated front to rear.
Rim Width Range 6.0-8.0 The approved wheel rim width range this tire will support.
Measured Rim Width 7.0 The recommended wheel width as recommended by the tire manufacturer to get the best wear us performance for this tire.
Section Width 9.1 The measurement from sidewall to sidewall.
Tread Width 7.9 The measurement from one side of the tread to the other side of the tread.
Overall Diameter 25.0 The height of the tire when fully inflated.
Manufacturer Part Number 28-922-672 Manufacturer part number (sku)